before
After!!
Here's what I did. Each chair took
me about 15 min to do start to finish.
I purchase fabric that comes in 5' length (on the roller). I can get 4 chair covers out of each yard and we have 8 chairs. That's 2 yards. This fabric was $21.99, but again, I used the 40% coupon! I put it on the floor in half and cut it at the crease and did that again and again until I was the cushion size squares.
My tools. I ended up just using the sizer stapler. It was easy enough.
I took the chair frame off. It was screwed in from the bottom. Total of 4 screws. The frame came right off. I cleaned it off a bit and ready to go to next step.
I put the fabric centered under the cushion
Then starting at the center, I stapled twice on each side of the screw hole. Then pulling tautly stapled the opposite side.
I went around all the side, cutting any excess off including in the corner area.
Corners are always tough. I pulled tautly again the center of the corner and stapled
Then working on the left side, pulled taut to keep from having too much fold showing on the edge or top and stapled. And then doing the same for the right.
Finished all the corners and trimmed any excess off and DONE. Repeated 7 more times :0)